Fiber proof testers are designed to use a set up load to your combination-spliced optical fiber in order to test the potency of the spliced fiber. Our fiber proof testers can be found in both linear and rotary styles, for proof and stress screening. Fiber proof testers are accessible for single mode, multimode, and polarization-sustaining fibers. Pick from devoted, standalone systems or multi-purpose designs which can be also competent at stripping, cleansing, cleaving, splicing, or recoating.

Fiber Recoaters with proof Testers provide easy, integrated answers to recoat and check fusion-spliced fibers. The fiber recoating procedure restores the buffer covering to your removed fiber, providing much more flexibility compared to a heat-reduce safety sleeve, allowing so that it is handled and coiled with no damage to the fusion-spliced area. The integrated linear or rotary proof tester allows users to immediately test a recoated fiber using a pre-decided load and determine the long-term longevity of the Optical Fiber Coloring Machine. Because of their ability to restore a combination-spliced fiber to near original condition, these techniques are best for programs like undersea optical fiber wires, submarine communication cabling, fiber lasers, or Dispersed Bragg Reflector (DBR) lasers.

The process starts off with the combination-spliced section of fiber being positioned in the midst of the mildew set up (see picture to the correct). As soon as set in place, inserts inside the fiber obstructs secure the spliced fiber in place. Recoat material is motivated into the cavity and after that Ultra violet-cured. The recoated fiber may then be tested by tugging onto it as much as a pre-decided load.

Recoater and Mildew Set up Options – Recoaters can be purchased with either an automatic or handbook mildew set up. The automatic mildew assembly features pneumatic charge of the mildew dishes and it is optimized for high-volume production applications. Handbook mold assemblies, however, use hinged mildew dishes which provide more versatility and are ideal for low-quantity production or R&D programs. An automated or manual volumetric dispensing pump and injection system can be used to inject the recoat materials into the mildew cavity.

The PTR208 automated recoater comes standard using a mold assembly for FTTH Cable Production Line; For the handbook recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mildew set up comes individually in order that customers can choose the right mildew covering diameter for his or her program. Customized mold coating dimensions can be found up to Ø900 µm. Pre-installing of the mold assembly on the manufacturer can also be available. Contact Technology Assistance for additional info on custom molds or factory set up.

We offer both higher-directory (Product # AB950200) and reduced-index (Product # PC373) recoat components to be used in these recoaters. Recoaters with manual injection pumps (Item #s PTR206B and PTR307B) are appropriate for each types of recoat material; all other recoaters are suitable for the high-index material only. Our handbook recoaters with the automated injection system (Item #s PTR206 and PTR307) can be customized to work with both the reduced- and high-index recoat materials; please contact Technology Support for additional information.

proof Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters have an integrated linear proof tester, that can take the fiber up to a predetermined load (20 N) then produces it. The linear proof tester utilizes the same fiber holding blocks because the recoater and thus the fiber will not need to be relocated prior to testing. The PTR307 and PTR307B Fiber Recoaters have an integrated rotary proof tester, which could perform both proof and tension tests (?89 N). One group of proof check grips is provided; replacement proof test grips are available below in packs of 10. Each testing procedure is fully programmable via the included handset or tablet control, enabling ikrsve user to select guidelines such as the load, the rate at which the burden is used, as well as the hold time.

Inserts for Fiber Keeping Obstructs – As well as the previously mentioned, we offer many different inserts to use within the Optical Fiber Ribbon Machine keeping obstructs in the recoaters so that you can assistance a variety of fiber covering diameters. For recoaters using a rotary proof tester, the inserts are compatible with fiber coating diameters inside a range from 125 µm to 900 µm. For recoaters having a linear proof tester, the inserts include a range for fiber films from Ø250 µm to Ø900 µm.

Yarn Binder – New Light On A Pertinent Idea..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.