Fiber proof testers are made to use a set load to Optical Fiber Coloring Machine in order to check the effectiveness of the spliced fiber. Our fiber proof testers are available in both linear and rotary designs, for both proof and tension testing. Fiber evidence testers are accessible for solitary mode, multimode, and polarization-sustaining fibers. Choose from devoted, standalone techniques or multi-purpose designs which can be also capable of stripping, cleaning, cleaving, splicing, and recoating.

Fiber Recoaters with Evidence Testers provide simple, integrated solutions to recoat and check fusion-spliced fibers. The fiber recoating procedure restores the buffer coating to a stripped fiber, providing more flexibility compared to a warmth-shrink safety sleeve, enabling that it is handled and coiled without damaging the fusion-spliced section. The integrated linear or rotary proof tester enables users to immediately check a recoated fiber using a pre-decided weight and determine the long-phrase reliability of the fiber. Because of their capacity to restore a combination-spliced fiber to close to original problem, these systems are perfect for programs including undersea optical fiber wires, submarine communication wiring, fiber lasers, or Distributed Bragg Reflector (DBR) lasers.

The process begins with the fusion-spliced portion of fiber being placed in the center of the mold set up (see picture to the right). Once set in position, inserts inside the fiber obstructs secure the FTTH Cable Production Line set up. Recoat material is pumped into the cavity and then Ultra violet-cured. The recoated fiber can then be analyzed by tugging on it up to a pre-decided weight.

Recoater and Mold Assembly Choices – Recoaters can be purchased with either an automated or handbook mold assembly. The automatic mold assembly functions pneumatic charge of the mold dishes and is optimized for high-volume production programs. Manual mold assemblies, in the other hand, use easy-to-open mold plates which provide more versatility and are best for low-volume manufacturing or RAndD applications. An automated or manual volumetric dispensing pump and injection system can be used to inject the recoat material in to the mold cavity.

The PTR208 automated recoater arrives regular with a mold assembly for Ø430 µm covered fibers; For our handbook recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly is sold individually to ensure that customers can select the right mold covering diameter for his or her application. Custom mold covering dimensions can be purchased approximately Ø900 µm. Pre-installing of the mold assembly in the manufacturer can also be readily available. Contact Technology Support for more information on custom molds or factory assembly.

We offer each higher-index (Item # AB950200) and low-directory (Item # PC373) recoat components for use in these recoaters. Recoaters with manual injection pumps (Product #s PTR206B and PTR307B) are appropriate for both kinds of recoat materials; all the other recoaters are appropriate for the high-index materials only. Our handbook recoaters having an automatic injection system (Product #s PTR206 and PTR307) can be personalized to work with both the low- and high-directory recoat material; make sure you get in touch with Tech Assistance to learn more.

Evidence Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters have an incorporated linear proof tester, that takes the fiber as much as a predetermined load (20 N) then releases it. The linear evidence tester utilizes exactly the same Optical Fiber Ribbon Machine since the recoater and therefore the fiber will not have to be moved before testing. The PTR307 and PTR307B Fiber Recoaters have an incorporated rotary proof tester, which can perform both evidence and stress tests (?89 N). One set of evidence check grips is provided; substitute evidence test grips are available below in packages of 10. Every testing process is fully automated through the included handset or tablet pc control, enabling kqkbws consumer to choose parameters like the load, the pace at which the burden is used, and also the hold time.

Inserts for Fiber Keeping Obstructs – As well as the previously mentioned, we offer a number of inserts to be used inside the fiber keeping blocks from the recoaters in order to support a broad range of fiber covering diameters. For recoaters having a rotary proof tester, the inserts are compatible with fiber coating diameters in a range from 125 µm to 900 µm. For recoaters with a linear evidence tester, the inserts include a range for fiber films from Ø250 µm to Ø900 µm.

Secondary Coating Line – Check Out This Write-Up..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.